Then use Win32ImageWriter to write the unzipped img file to your flash device. If you get any errors trying to run the following code then try reinserting the SD card and trying again after unmounting the disk, or try formatting it first with DiskUtilitiesĭownload the image and extract it using WinZip or some other archive utility. Then use the following code to write the image to disk1 ( not - disk1s1.) sudo dd bs=4m if=ubuntu-12.04-preinstalled-server-armhf+omap4.img of=/dev/disk1 not - disk0, unmount it with the following code. sudo dd bs=4M if=ubuntu-12.04-preinstalled-desktop-armhf+omap4.img of=/dev/sdeĭownload the image and extract it with the system archive utility, you should get a.gunzip ubuntu-12.04-preinstalled-desktop-armhf+.If this doesn't work, try the following commands: Some people have reported issues with this method. ubuntu-12.04-preinstalled-desktop-armhf+ |sudo dd bs=4M of=/dev/sde sudo sync (replacing omap4 and sde with the right values i.e. Identify the correct raw device name (like /dev/sde - not /dev/sde1) Make sure the SD card is not mounted (just umount it if needed).Place the SD card at your host computer.Make sure you're using at least a 4G SD card (desktop image is 2G uncompressed). You should write the raw image to a blank SD card. Warning Check the md5sum to verify the image For omap4 based systems, use ubuntu-12.04-preinstalled-desktop-armhf+.For omap3 platforms, use ubuntu-12.04-preinstalled-desktop-armhf+.To use preinstalled OMAP3/4 Precise (12.04) images, apply the following steps: Precise Pangolin (12.04) Installation Instructions Follow more or less 12.04 instructions, but use the 12.10 pre-installed images.To install these images you should have a USB disk as target device.
With the Ubuntu 12.10, ARM desktop images are now standard Ubuntu live images as known from other architectures. Quantal Quetzal (12.10) Installation Instructions Precise Pangolin (12.04) Installation Instructions.Quantal Quetzal (12.10) Installation Instructions.
0 kommentar(er)
